Online UPS 1500VA/1350W 8xIEC C13, LCD

DN-170090, Online UPS 1500VA/1350W 8xIEC C13, LCD

True double-conversion technology

Micro process management optimizes the reliablity in case of electricity failure

Power factor 0.9

Optional SNMP Card is available, enables remote control via LAN

EPO switch (Emergency Power Off)

UPS can be mounted into rack or as a tower with stand

Nominal- & output voltage: 200/208/220/230/240 VAC

Voltage range: 110-290 VAC ± 5%

Capacity: 1500VA/1350W

Frequency range: 45 Hz-65 Hz

Power factor: ≥ 0.98 @ input voltage; ≥ 0.90 @ output voltage

AC voltage regulation (battery mode): ± 2%

Frequency range (synchronized range): 50 Hz or 60 Hz

Frequency range (battery mode): 50 Hz ± 0.02 Hz or 60 Hz ± 0.02 Hz

Current crest ratio: 3:1 (max.)

Harmonic distortion (line mode): ≤ 3% THD (linear mode); ≤ 5% THD (non-linear mode)

Transfer time (line mode to battery mode): Zero

Transfer time (inverter to bypass): 4 ms (typical)

Wave form (battery mode): Pure sinewave

Efficiency 90% (AC mode); 85% (battery mode); 95% (ECO mode)

Typical recharge time: 5 hours to recover 90% of capacity

Battery: 12V/9Ah x3

Charging current: 1.4 A

Charging voltage 41.1 VDC ± 1%

Humidity: 0-90% RH @ 0 °C to +40 °C (non condensing)

Noise level: Under 50 dBA @ 1 meter

Alarm sounds: Battery mode (sounding every 4 sec.), low battery (sounding every second), overload (sounding twice every second), fault (continously sounding)

Hot swap: Changing of battery possible while operating ("hot swap")

Support: Smart RS-232/USB supports Windows® 2000/2003/XP/Vista/2008, Windows® 7/8/10, Linux, FreeBSD and Mac

Typical backup time in minutes at 25% load: 20.0; at 50% load: 8.0; at 75% load: 5.0; at 100% load: 3.0

With overload-, discharge-, and overcharge protection

LCD display (Load level, battery level, AC mode, battery mode, bypass mode, fault locator)

19“ mountable

8x IEC C13; 4x programmable

Dimensions (H x W x D): 86.5 (2U) x 440 x 430 mm

Weight: 16,1 kg